Problem: The unit has just frozen up. It keeps freezing and then shutting itself down.
There are 0 comments on this problem.
Solution 1:
It can be extremely frustrating when this happens. Most of the time, there isn't much you can do other than turn it off and then on again, at the mains if the power button isn't responding.
However, there are a few things you can check to help prevent it in the future. Number one is check how hot it is. Freezing can happen when the unit isn't properly ventilated or is in a hot place. Make sure all the vents are uncovered and there is nothing on top of it. You might also want to check for system updates. Finally, you might consider turning the unit off and then on again regularly to reboot it. Freezing often occurs when it has been running for a long time, so once a week or so you could try to reboot it by switching it off and on. If you don't want to do this yourself, you might consider buying a timer switch to do this for you at a time you know you won't be using the machine, e.g. 4AM. 0 out of 0 people found this solution helpful.
Problem: Recordings keep failing. Sometimes when I record a programme, I get an error message and I lose the recording.
There are 0 comments on this problem.
Solution 1:
Recordings fail for a number of reasons. If you schedule the recording and it records - but records the wrong thing - the box might be tuned to two different regions. Reset the channels and manually tune them if you suspect this to be the case. If the unit is on a series record but has missed the programme, check the programme guide to see if future episodes are being recorded. It may have identified the programme as a different series for some reason, so set a series link on any future episodes that are not being recorded.
Other failed recordings can show a problem with the unit. One or two failed recordings do not necessarily mean that your unit has a fault - it could be due to a power cut or your box could have (unluckily!) frozen or crashed prior to the start of the programme.
However, if there are numerous failed recordings and it continues to occur even though you can watch TV OK, it sounds like a problem with the hard disk and this will need to be either repaired or replaced. 0 out of 0 people found this solution helpful.
Problem: After set up I tried the on demand player (BBCi Player) and it worked very well. However after the unit was switched off at the mains the on demand channel just displays a blank page with a bar across the top. I had a second unit brand new in the box and this did exactly the same! Goodmans said it could be something to do with "MAC Addressing" however I contacted my ISP and they had no idea what Goodmans were talking about in regard to this being an ISP problem. I have tried a first time install again however nothing clears the problem. I now have two Gfsat200hd boxes neither of which will work with BBCI player. Goodmans advised returning them as they could be faulty however I believe there must be a settimg I could alter to make them work. Any ides appreciated.
There are 0 comments on this problem.
Solution 1:
I had exactly the same problem, as crazy as it sounds I changed the hdmi cable and the problem was solved. Goodmans had also told me it was a MAC address problem so it's worth a try. 0 out of 0 people found this solution helpful.
Post a new question about the Goodmans GFSAT200HD Freesat HD
All problems on this page have been submitted and answered by users. If you have a problem with the Goodmans GFSAT200HD Freesat HD, please submit it below and we'll post it here.
Solve an unsolved problem for the Goodmans GFSAT200HD Freesat HD
Can you help?
If you can solve a currently unsolved problem, please select the problem you can solve from the list below. Even if you can't solve it, you can still comment on problems if you think it would help.
Problem: When BBC HD broadcasts with a Audio Description, I can't turn it OFF. Its driving me crazy. I've checked all settings and used the AD button but none of the options turn it OFF. HELP, how do i do it. All I can do now is watch HD NI who don't have the Audio.
- I've come here looking for a solution to the same problem - AD is on when watching BBC HD programmes with AD. I am constantly switching AD off in the Settings Menu and using the AD button on the remote, but the little voice won't leave me alone!
Helpful: 0/0 Do you think this comment was helpful?
Problem: Please help! After switching on this morning,every chanel shows No Signal. Every thing has been fine up untill then so I thought I`ll check connections -all o.k. so I tried first time install which gets me to step2 but when the prompt says check signal strength I press the blue button on the remote and up comes step 3enter post code which I do then nothing for 5 mins and then back to step one appears . I`ve unpluged every thing and switched all back on again four times since 11am. all still the same. Thanks.
Problem: Our Goodmans Freesat shows "recording" 2 seconds later it shows "recording failed" if we press the record button again it starts to record properly. This frequently happens and is particularly annoying if we want to record programmes whilst we are out. However!! sometimes it works - any suggestions?
Problem: My box behaves as if someone is randomly operating the remote scrolling through the programme information or the guide. It can only be stopped by holding the exit button.
If you have a problem and the PVR or Hard Disk Recorder is under a year old, contact your retailer to arrange a repair or replacement. Under the Sale of Goods Act, you should be covered for at least a year and maybe longer.
If you open a PVR or Hard Disk Recorder, you are likely to invalidate the warranty.
Solutions suggested on this site are for informational purposes only; we accept no responsibility for any damage or financial loss caused as a result of following the advice shown here.