Spotlight: TVs
Top ten brands: TVs...
...in terms of customers getting their problems solved on this site:
Common problems with the Triax TRI-LINK Kit


Solutions for the Triax TRI-LINK Kit
0 people also had this problem.

Problem: The unit has just frozen up. It keeps freezing and then shutting itself down.

There are 0 comments on this problem.

Solution 1: It can be extremely frustrating when this happens. Most of the time, there isn't much you can do other than turn it off and then on again, at the mains if the power button isn't responding.

However, there are a few things you can check to help prevent it in the future. Number one is check how hot it is. Freezing can happen when the unit isn't properly ventilated or is in a hot place. Make sure all the vents are uncovered and there is nothing on top of it.
You might also want to check for system updates.
Finally, you might consider turning the unit off and then on again regularly to reboot it. Freezing often occurs when it has been running for a long time, so once a week or so you could try to reboot it by switching it off and on. If you don't want to do this yourself, you might consider buying a timer switch to do this for you at a time you know you won't be using the machine, e.g. 4AM.
0 out of 0 people found this solution helpful.
Was this solution helpful?
There are 0 comments on this solution.

Post comments, submit alternative solutions or receive notifications



0 people also had this problem.

Problem: Recordings keep failing. Sometimes when I record a programme, I get an error message and I lose the recording.

There are 0 comments on this problem.

Solution 1: Recordings fail for a number of reasons. If you schedule the recording and it records - but records the wrong thing - the box might be tuned to two different regions. Reset the channels and manually tune them if you suspect this to be the case.
If the unit is on a series record but has missed the programme, check the programme guide to see if future episodes are being recorded. It may have identified the programme as a different series for some reason, so set a series link on any future episodes that are not being recorded.

Other failed recordings can show a problem with the unit. One or two failed recordings do not necessarily mean that your unit has a fault - it could be due to a power cut or your box could have (unluckily!) frozen or crashed prior to the start of the programme.

However, if there are numerous failed recordings and it continues to occur even though you can watch TV OK, it sounds like a problem with the hard disk and this will need to be either repaired or replaced.
0 out of 0 people found this solution helpful.
Was this solution helpful?
There are 0 comments on this solution.

Post comments, submit alternative solutions or receive notifications



0 people also had this problem.

Problem: Picture keeps stuttering and is blocky and pixellated.

There are 0 comments on this problem.

Solution 1: Check for loose cables and check your signal strength.
0 out of 0 people found this solution helpful.
Was this solution helpful?
There are 0 comments on this solution.

Post comments, submit alternative solutions or receive notifications




Post a new question about the Triax TRI-LINK Kit
All problems on this page have been submitted and answered by users. If you have a problem with the Triax TRI-LINK Kit, please submit it below and we'll post it here.

Details of your problem:
Please ensure that the above box is not empty


Please note that all problems are moderated.



  Back to top
Solve an unsolved problem for the Triax TRI-LINK Kit

Can you help?
If you can solve a currently unsolved problem, please select the problem you can solve from the list below.
Even if you can't solve it, you can still comment on problems if you think it would help.



Jump to page: [1]
0 people also had this problem.

Problem: My YouView box via Triax Tri-Link sends strong signal to TV in other room. But some channels on that TV are very badly pixellated and quite unwatchable. What's the cause of this pixellation and how do I prevent it?

There are 0 comments on this problem.

Post solution, add your comments or receive notifications



0 people also had this problem.

Problem: Using link to other room. NO SOUND ON SECOND TV. Picture fine and magic eye control working ok.

There are 0 comments on this problem.

Post solution, add your comments or receive notifications



0 people also had this problem.

Problem: Hi there.
I was able to use my previous receiver in a second room by using a Triax Tri Link modulator & a magic eye.
Sadly my receiver gave up last week.
I purchased an Edision OS Mini Twin Tuner only to discover that it has no scart connection or RCA inputs.
So I connected a RCA to Scart adaptor to the Tri Link to send the signal to another room.
I have a perfect picture & I can change the channels.
The problem is that I can only barely hear the sound & there is terrible static noise in the second room.
The Tri Link was set to channel 36 & I kept changing it to different numbers between 1 & 69 but the static is still there.
Am I doing something wrong?

There are 0 comments on this problem.

Post solution, add your comments or receive notifications



1 person also had this problem.

Problem: Hi i have a solo2 sat box with a tri link kit to 3 tv every think worked fine for about a month than the main tv was fine but the other tvs lost the sound i found the scart lead to the A/V output had come out i put it back in but still no sound main tv fine all the magic eyes work

any ideas i think the tri link box has failed .

Regards paul

There are 0 comments on this problem.

Post solution, add your comments or receive notifications



Actions - No registration required
Find a PVR and Hard Disk Recorder
Alba
Amstrad
Bush
Digital Stream
EchoStar
Goodmans
Grundig
Hitachi
Humax
IceCrypt
Konig
Labgear
LG
Manhattan
Openbox
Pace
Panasonic
Philips
Ross
Sagemcom
Samsung
SKY
TechniSat
Technomate
Thomson
Triax
VU+