|
|
IceCrypt T2400 overview
Number of problems: 18
Number of solved problems: 6
Number of unsolved problems: 12
Problem resolution: 33%
Compared to other pvr and hard disk recorders:
IceCrypt T2400: Likelihood of getting a solution
Ranking: 9th out of 118
Most likely to get a solution:
Digital Stream DHP8100U - problem resolution score of 100%
Digital Stream DHP8100U - problem resolution score of 100%
Least likely to get a solution:
Panasonic DMR-EX86EB-K - 2 out of 11 problems solved
Panasonic DMR-EX86EB-K - 2 out of 11 problems solved
Solved problem list for the IceCrypt T2400
(Click on a problem to see the solution)Jump to page:
[1] [2]
On some occasions Icecrypt stops recording before the program has finished. Any one with the same problem - solution welcomed.
My icecrypt t2400 hdpvr won't start up all I get is a brief light flesh when switched on nothing else
Hi my t2400 will not turn on all of a sudden. When switched on the knob and button briefly flash blue then nothing. No display just a humming. What's gone wrong?
Unsolved problem list for the IceCrypt T2400
(Click on a problem to comment or help)I have done an autoscan as the box froze. All the channels are there, but the epg is blank so I can't watch any TV. Any ideas???
Playback hesitates and is jerky
The box is stuck on a "First Installation" page. Neither the remote nor the buttons on the box itself do anything. The screen simply has "Language: English, HD/SD: Enter Password, Screen Ratio: 16:9" on it. Nothing else. Turning it off and unplugging then plugging back in does not fix.
Solutions for the IceCrypt T2400
0 people also had this problem.
Problem: On some occasions Icecrypt stops recording before the program has finished. Any one with the same problem - solution welcomed.
There are 0 comments on this problem.
Solution 1: I'm not sure it's the same for every model but if you press record twice a menu comes up with a record duration on, might be worth checking?
0 out of 0 people found this solution helpful.
Was this solution helpful?
There are 0 comments on this solution.
4 people also had this problem.
Problem: My icecrypt t2400 hdpvr won't start up all I get is a brief light flesh when switched on nothing else
There are 2 comments on this problem.
Show/Hide
- I have had this problem recently.I could hear the hard drive start up but no picture on TV and no display on front of Icecrypt.
BEFORE this problem happened I was watching the TV and the screen went black.The Icecrypt was showing the channel on the display even though I had no picture.Icecrypt seemed frozen.Swithed it off at the back and then on again.That's
when I started getting "the won't start up problem",with the brief light flash on the front switch of the Icecrypt..Tried switching on and off at the back of the Icecrypt,leaving it off for a few minutes each time.Nothing except the noise of the hard drive starting.Had thought that is the end of the Icecrypt.Tried switching on at the back for a last time and lo and behold it started up as normal,so I'm keeping my fingers crossed.(Sometimes it's worth unplugging the Icecrypt from the mains for a while when it plays up-definitely a rather tempremental device!)
BEFORE this problem happened I was watching the TV and the screen went black.The Icecrypt was showing the channel on the display even though I had no picture.Icecrypt seemed frozen.Swithed it off at the back and then on again.That's
when I started getting "the won't start up problem",with the brief light flash on the front switch of the Icecrypt..Tried switching on and off at the back of the Icecrypt,leaving it off for a few minutes each time.Nothing except the noise of the hard drive starting.Had thought that is the end of the Icecrypt.Tried switching on at the back for a last time and lo and behold it started up as normal,so I'm keeping my fingers crossed.(Sometimes it's worth unplugging the Icecrypt from the mains for a while when it plays up-definitely a rather tempremental device!)
Helpful: 0/0 Do you think this comment was helpful?
- Also got this problem. I assume it's a typical power supply problem with failed capacitors but more info would be great.
Helpful: 0/0 Do you think this comment was helpful?
Solution 1: I had this very same problem, the previous poster has hit the nail on the head. I took the cover off, and sure enough there was blown capacitor on the power board. (Identified by the bowed top on the capacitor, tops should be flat). Replacement capacitor from ebay came in at £1.78 (3300uf 10v) simple soldering job and jobs a good 'in. Box now working fine again. Was on the cusp of buying a Humax PVR, but want to wait for the next generation of 4k PVRs, so thank you previous poster, saved me £200!
1 out of 1 person found this solution helpful.
Was this solution helpful?
There are 0 comments on this solution.
1 person also had this problem.
Problem: Hi my t2400 will not turn on all of a sudden. When switched on the knob and button briefly flash blue then nothing. No display just a humming. What's gone wrong?
There are 0 comments on this problem.
Solution 1: Could be hard disk failure.
0 out of 0 people found this solution helpful.
Was this solution helpful?
There are 0 comments on this solution.
0 out of 0 people found this solution helpful.
Was this solution helpful?
There are 0 comments on this solution.
Jump to page:
[1] [2]
