Problem: The unit has just frozen up. It keeps freezing and then shutting itself down.
There are 0 comments on this problem.
Solution 1:
It can be extremely frustrating when this happens. Most of the time, there isn't much you can do other than turn it off and then on again, at the mains if the power button isn't responding.
However, there are a few things you can check to help prevent it in the future. Number one is check how hot it is. Freezing can happen when the unit isn't properly ventilated or is in a hot place. Make sure all the vents are uncovered and there is nothing on top of it. You might also want to check for system updates. Finally, you might consider turning the unit off and then on again regularly to reboot it. Freezing often occurs when it has been running for a long time, so once a week or so you could try to reboot it by switching it off and on. If you don't want to do this yourself, you might consider buying a timer switch to do this for you at a time you know you won't be using the machine, e.g. 4AM. 0 out of 0 people found this solution helpful.
Problem: Recordings keep failing. Sometimes when I record a programme, I get an error message and I lose the recording.
There are 0 comments on this problem.
Solution 1:
Recordings fail for a number of reasons. If you schedule the recording and it records - but records the wrong thing - the box might be tuned to two different regions. Reset the channels and manually tune them if you suspect this to be the case. If the unit is on a series record but has missed the programme, check the programme guide to see if future episodes are being recorded. It may have identified the programme as a different series for some reason, so set a series link on any future episodes that are not being recorded.
Other failed recordings can show a problem with the unit. One or two failed recordings do not necessarily mean that your unit has a fault - it could be due to a power cut or your box could have (unluckily!) frozen or crashed prior to the start of the programme.
However, if there are numerous failed recordings and it continues to occur even though you can watch TV OK, it sounds like a problem with the hard disk and this will need to be either repaired or replaced. 0 out of 0 people found this solution helpful.
Problem: just bought today. signal is fine when direct to tv. it loses signal when via box
There are 0 comments on this problem.
Solution 1:
we bought an inline aerial amp for use indoors £10 or less,because loop thro from set top boxes dilutes signal strength (db loss) ie signal via rooftop aerial 0 out of 0 people found this solution helpful.
Post a new question about the Panasonic DMR-PWT530EB
All problems on this page have been submitted and answered by users. If you have a problem with the Panasonic DMR-PWT530EB, please submit it below and we'll post it here.
Solve an unsolved problem for the Panasonic DMR-PWT530EB
Can you help?
If you can solve a currently unsolved problem, please select the problem you can solve from the list below. Even if you can't solve it, you can still comment on problems if you think it would help.
Jump to page:
[1]
0 people also had this problem.
Problem: The red light on box stays on permanently. When I press Guide the HDD icon seems to show "full" but then the guide informs me that I have 115 hours of recording left. I have cleared all old recordings. It allows me to record and shows that I am recording but the Guide does not show the usual recording in progress. The function mode shows there is inadequate space. They are contradictions. I read the forum which suggested switching on and off and leaving for a few hours but this has made no difference. What is the problem, please?
Problem: Have a similar problem on Panasonic DMR PWTEB in that box stating NEW CHANNELS FOUND PRESS OK TO UPDATE OR EXIT TO IGNORE. Keeps popping up on screen
This message comes up even after updating channel list.
Problem: Have a similar problem on Panasonic DMR PWTEB in that box stating NEW CHANNELS FOUND PRESS OK TO UPDATE OR EXIT TO IGNORE. Keeps popping up on screen
This message comes up even after updating channel list.
Problem: I live near Crystal Palace (6m) so the signal quality is superb. I have a new (as of Dec 2013) Panasonic Viera TV and I get all the Freeview channels with no pixellation or stuttering.
I acquired a PWT530EB in May and after initial tuning I did not have all the channels. Everytime I switched it on, it found new channels but previously working channels stopped working. I received a replacement unit today and am finding that it will only tune in 28 channels. BBC channels are missing. Looks like Channels 25 and 26 are fine bit channels 22, 23 (BBC channels), 28-29 and HD channels (30+) are not being tuned. I have tried this several times now, resetting the unit each time. The TV is fine and has no issues so I know it is not the Aerial or cable.
Can anyone assist? I have contacted Panasonic but they were pretty useless.
Problem: Have had the machine for about 3 months, everything fine until a few days ago when programmes have not been recorded- the red record button keeps flashing while it should be recording but nothing actually is recorded
If you have a problem and the PVR or Hard Disk Recorder is under a year old, contact your retailer to arrange a repair or replacement. Under the Sale of Goods Act, you should be covered for at least a year and maybe longer.
If you open a PVR or Hard Disk Recorder, you are likely to invalidate the warranty.
Solutions suggested on this site are for informational purposes only; we accept no responsibility for any damage or financial loss caused as a result of following the advice shown here.